UHMWPE rope cables need to be stored in a clean and dry place;
UHMWPE rope need to be kept away from direct sunlight, which can accelerate the aging of the cables and affect their quality;
UHMWPE rope should be kept away from high-temperature storage environments, and long-term storage temperatures should be less than 40 ° C;
When UHMWPE rope, they should be kept off the ground and placed on shelves to ensure overall ventilation; Do not directly place the cable on concrete, soil, or steel plates;
UHMWPE rope should be kept away from chemical reagents such as acids and bases under all circumstances;When sailing at sea, when not using UHMWPE rope , they should be placed in the cabin and neatly coiled on Grandin planks to keep the cables dry. The UHMWPE rope on the car should be neatly coiled on the car, and then covered with a canvas cover to avoid direct sunlight. Pay attention to cable contamination by oil, paint, or chemicals, and keep away from heat sources. The cable should be checked for breakage, wear, degradation, and pulverization. If serious defects are found, they should be replaced immediately
![微信图片_20240621140932](/uploads/f72279c4.png)
![微信图片_20240621140945](/uploads/30bcb8ea.png)
![微信图片_20240704165125](/uploads/b3df6025.jpg)
UHMWPE rope need to be coiled in order according to their own weaving process and direction. If the length of the cable is long, tools such as wooden stakes can be used for winding, and then tied and fixed. It is important to note that the winding sequence of the cable should not be too chaotic. Try to place it flat on a dry ground and avoid hanging it vertically for storage. The inner core of the polymer rope is made of ultra-high molecular weight polyethylene fiber. After the production of the inner core is completed, it is soaked in a specialized water-soluble insulating resin adhesive. This adhesive has the effect of increasing the breaking force and also enhancing the electrical insulation, wear resistance, anti-static properties, and other effects;
Post time: Jul-04-2024