Intambo ye-PE
Intambo ye-polyethylene ehlala ixesha elide inokuba lukhetho oluguquguqukayo noluthembekileyo kwizicelo ezahlukeneyo ngenxa yamandla ayo, ukuqina, kunye nokuxhathisa imitha ye-UV, amanzi, kunye ne-abrasion.
Nazi ezinye iimpawu eziqhelekileyo kunye neengcebiso zentambo ye-polyethylene ehlala ixesha elide:
Izinto eziphathekayo: Iintambo zePolyethylene (PE)Iintambo zePolyethylene zinika umlinganiselo obalaseleyo wokomelela ukuya kubunzima, nto leyo izenza zibe khaphukhaphu kodwa zomelele. Ziyakwazi ukumelana neekhemikhali, kuquka iiasidi kunye neealkali, zizenza zilungele iindawo ezahlukeneyo.
Ulwakhiwo kunye noDayamitha:Khangela iintambo ezinolwakhiwo olujijekileyo, njengoko zikholisa ukuhlala ixesha elide kwaye zomelele ngakumbi.Iintambo ezityebileyo zinika amandla amakhulu kunye nokuqina.
Iingcebiso zokuSebenza:Iintambo zepolyethylene ziqhele ukusetyenziselwa imisebenzi yangaphandle efana nokuloba, ukupakisha, ukukhwela isikhephe, kunye nolwandle.
Iingqwalasela xa uthenga:Jonga ubungakanani bobunzima okanye ukureyishwa kwentambo ukuqinisekisa ukuba inako ukuthwala umthwalo ofunekayo wokusebenza.Jonga uphononongo lwabathengi okanye iinkcukacha zemveliso ukuqinisekisa ukuqina, ukomelela, kunye nobomi obude bentambo.Thelekisa amaxabiso kunye nokhetho olusuka kwiibrendi ezithembekileyo ukuya fumana elona xabiso lilungileyo kwiimfuno zakho.Khumbula ukukhetha ubukhulu obufanelekileyo, ukwakhiwa, kunye nobunzima obusekelwe kwiimfuno zakho ezithile.Kuhlala kululuvo oluhle ukudibana nomthengisi okanye umenzi ngalo naluphi na ulwazi olongezelelweyo okanye iingcebiso ezisekelwe kusetyenziso olucetyiweyo.
Kwiminatha yokuloba, intambo edadayo ibalulekile ekugcineni umphezulu womnatha udada phezu kwamanzi.Oku kunceda ukuthintela umnatha ekuzikeni nasekujikeni, nto leyo eyenza kube lula ukuwuphatha nokuwubuyisa.
Nazi ezinye iingqwalasela zokukhetha intambo yokuloba ngomnatha:
I-Buoyancy: Jonga intambo eyenzelwe ngokukodwa ukuba ibe ne-buoyancy ephezulu.Oku kuqinisekisa ukuba intambo iya kudada ngokufanelekileyo, igcine umnatha udada kwaye ubonakala.
Material: Eyona nto isetyenziswa kakhulu ekulobeni iintambo zomnatha ezidadayo yipolypropylene okanye ipolyethylene.Ezi zixhobo zikhaphukhaphu, zomelele, kwaye zixhathisa ukuthotywa ukusuka ekukhanyeni kwelanga kunye nokufuma.
Ulwakhiwo: A olulukiweyo okanyeintambo ephothiweyoulwakhiwo luqhele ukusetyenziselwa ukuloba iintambo zokudada ngomnatha.Zombini iinketho zinika amandla kunye nokuthembeka.
Ububanzi: Ububanzi bentambo buxhomekeke kubungakanani kunye nobunzima bomnatha wakho wokuloba.Iintambo ezishinyeneyo zidla ngokusetyenziselwa iminatha emikhulu, enzima kakhulu ukunika ukunyakazela okwaneleyo.
Ubude: Ubude bentambo edadayo buya kuxhomekeka kubungakanani bomnatha wakho wokuloba kunye nobunzulu bamanzi apho uya kuloba khona.Kuyacetyiswa ukuba kubekho intambo edadayo eyaneleyo ukugquma iperimeter yenethi ngokwaneleyo.
Umbala: Ukukhetha umbala obonakala kakhulu njengoorenji oqaqambileyo, omthubi, okanye omhlophe kunokwenza kube lula ukubona nokulawula umnatha emanzini.
Izinto ezincamathelayo ezidadayo: Ezinye iintambo ezidadayo zokuloba ziza kunye nezinto ezidadayo ezakhelwe ngaphakathi ecaleni kobude bentambo, zinika ukuqaqamba okungaphezulu kunye nokubonakala. indawo yakho.Kuhlala kululuvo olulungileyo ukuthethana nabalobi abanamava okanye iivenkile ezithengisa ngokuloba zasekuhlaleni ukuze ufumane iingcebiso malunga nentambo edadayo efanelekileyo yomnatha wakho.
Iphepha lobugcisa
| SIZE | Intambo ye-PE(ISO 2307-2010) | |||||
| Dia | Dia | Cir | Ubunzima | MBL | ||
| (mm) | (intshi) | (intshi) | (kgs/220m) | (lbs/1200ft) | (iikgs okanye iitoni) | (kn) |
| 4 | 5/32 | 1/2 | 1.78 | 4.84 | 200 | 1.96 |
| 5 | 3/16 | 5/8 | 2.66 | 8.99 | 300 | 2.94 |
| 6 | 7/32 | 3/4 | 4 | 13.76 | 400 | 3.92 |
| 7 | 1/4 | 7/8 | 5.5 | 18.71 | 550 | 5.39 |
| 8 | 5/16 | 1 | 7.2 | 24.21 | 700 | 6.86 |
| 9 | 11/32 | 1-1/8 | 9 | 29.71 | 890 | 8.72 |
| 10 | 3/8 | 1-1/4 | 9.9 | 36.32 | 1,090 | 10.68 |
| 12 | 1/2 | 1-1/2 | 14.3 | 52.46 | 1,540 | 10.47 |
| 14 | 9/16 | 1-3/4 | 20 | 73.37 | 2,090 | 20.48 |
| 16 | 5/8 | 2 | 25.3 | 92.81 | 2.80Ts | 27.44 |
| 18 | 3/4 | 2-1/4 | 32.5 | 119.22 | 3.5 | 34.3 |
| 20 | 13/16 | 2-1/2 | 40 | 146.74 | 4.3 | 42.14 |
| 22 | 7/8 | 2-3/4 | 48.4 | 177.55 | 5.1 | 49.98 |
| 24 | 1 | 3 | 57 | 209.1 | 6.1 | 59.78 |
| 26 | 1-1/16 | 3-1/4 | 67 | 245.79 | 7.41 | 72.61 |
| 28 | 1-1/8 | 3-1/2 | 78 | 286.14 | 8.2 | 80.36 |
| 30 | 1-1/4 | 3-3/4 | 89 | 326.49 | 9.5 | 93.1 |
| 32 | 1-5/16 | 4 | 101 | 370.51 | 10.7 | 104.86 |
| Uphawu | I-Dongtalent |
| Umbala | Umbala okanye ngokwezifiso |
| MOQ | 500KG |
| OEM okanye ODM | Ewe |
| Isampulu | Ubonelelo |
| Izibuko | Qingdao / Shanghai okanye nawaphi na amanye amazibuko e China |
| Immimiselo yokuhlawula | I-TT 30% kwangaphambili, i-70% ngaphambi kokuthunyelwa; |
| Ixesha lokuzisa | 15-30 iintsuku ekufumaneni intlawulo |
| Ukupakishwa | Iikhoyili, iinyanda, iireli, ikhathoni, okanye njengoko ufuna |
